Ice Maker Repair in the San Francisco Bay Area
When a refrigerator ice maker stops making ice, the cause is usually one of four things: a frozen fill tube, a failed water inlet valve, low water pressure from a clogged filter or a kinked supply line, or a worn ice maker assembly. A technician can check all four on one visit. Same-day service available. Call (415) 585-5900.
Licensed & insured · EPA certified · Trusted by 30+ property managers · 90-day warranty on qualifying repairs
Call or text (415) 585-5900. Same-day service available. $219 service call, free if you go ahead with the repair.
Refrigerator ice makers and under-counter ice machines stop working for a short list of reasons: low water pressure, a frozen fill tube, a bad inlet valve, or a worn-out ice maker module. A clogged water filter alone causes a lot of these calls, so if you just changed the filter, tell us.
Common ice maker problems we fix
No ice at all
Frozen fill tube, bad water inlet valve, low water pressure or a failed ice maker module.
Small or hollow cubes
Low water pressure or a partly clogged filter. Sometimes the valve.
Ice maker leaking
Cracked fill tube, a valve that won't shut off all the way, or a loose water line.
Under-counter ice machine not making ice
Scale buildup, a dirty condenser, a water pump or a sensor. These need regular cleaning in hard-water areas.
Ice tastes or smells bad
Old filter, old ice, or a dirty bin. Cheap to fix.
Dispenser jams
Ice clumped in the bin from a door left open or a defrost problem.
Where ice makers usually fail, by brand
The symptoms look about the same on every fridge. The part that fails depends on where the ice maker sits and how the fridge gets water and cold air to it.
Samsung French-door and side-by-side (ice maker in the door)
The ice maker sits in an insulated box in the fresh-food door, cooled by air sent over from the freezer. When that box stops sealing, its fan has trouble, or warm humid air gets in, frost builds up around the ice maker and the bucket freezes into one block. Updated parts exist for many of these models, so defrosting it by hand is usually only a short-term fix.
LG French-door (ice maker in the door)
A similar layout to Samsung, with similar failures: frost in the ice compartment, a bucket that freezes solid, and a fill tube that ices over so the tray never fills. A weak ice compartment fan or a door that does not close all the way makes it worse.
GE, Café and Monogram
Depending on the model, the ice maker sits in the freezer or in an insulated box in the fresh-food section. The usual failures are a fill tube that freezes shut, a water valve coil that no longer opens, and the ice maker module itself, which can stall partway through a cycle with the ejector arms stuck. On side-by-sides, check that the shutoff arm or switch has not been bumped to off.
Whirlpool, KitchenAid and Maytag
A frozen fill tube is the classic one, often because low water pressure lets the valve drip instead of filling the tray quickly. The water inlet valve and the ice maker assembly come next. French-door models with the ice maker in the fresh-food section can also frost up when the ice box door or its seal does not close tight.
Sub-Zero and other built-ins
On built-ins the ice maker is in the freezer section. Common failures are the water valve, the ice maker module and a frozen fill tube. A freezer that runs warm will also slow or stop ice, so it is worth checking the freezer temperature and the condenser before blaming the ice maker.
Undercounter ice machines
These make ice on a cold plate or grid instead of in a tray, so mineral scale is the main problem. Scale on the evaporator slows the harvest and makes thin or cloudy ice. Other common failures are a dirty condenser behind the front grille, a clogged water distributor, the water pump, the drain pump on models that pump out to a standpipe, and a bin sensor that wrongly reads the bin as full.
Quick checks before you call
- Make sure the ice maker is on. Many have a wire shutoff arm that should be down, others an on/off switch or a setting on the control panel.
- Look at the water filter. If it is overdue or not the right one for your fridge, water pressure drops and cubes come out small or not at all.
- Check the freezer temperature. Ice makers need the freezer near 0°F. If the freezer is running warm, that is the problem to fix first.
- Check behind the fridge for a kinked water line, and make sure the shutoff valve feeding it is fully open.
- Just installed the fridge or a new ice maker? Give it up to 24 hours for the first ice, and throw out the first batch.
Pricing
Ice maker repair: from $275
$219 service call, free if you go ahead with the repair.
“From” price. The final price depends on the brand and model of your unit, and you get the exact price before any work starts. Parts and labor, OEM parts, 90-day warranty on qualifying repairs.
Call (415) 585-5900 or book online
Mon to Fri, 8am to 5pm · $219 service call, free if you go with the repair · 90-day parts and labor on qualifying repairs
What we work on
- Refrigerator ice makers (French door, side-by-side, built-in)
- Under-counter ice machines
- Samsung in-door ice makers
Brands
Sub-Zero, GE, Monogram, Samsung, LG, Whirlpool, KitchenAid, Viking. All brands we repair.
Where we work
We cover the San Francisco Bay Area from our Daly City base. In the city, see San Francisco refrigerator, wine cooler and ice machine repair. For other cities, see our service areas.
Helpful guides
Frequently asked questions
How much does ice maker repair cost?
Ice maker repairs start from $275. The final price depends on the brand, model and part. The $219 service call is free if you go ahead with the repair.
Why does my Samsung ice maker keep freezing up?
It's a known problem on some in-door models. There are updated parts and fixes for many of them, and we deal with it often.
Do you repair under-counter ice machines at home?
Yes, residential under-counter units. We don't service commercial ice machines.
Can a water filter stop the ice maker?
Yes. A clogged or wrong filter cuts the water pressure. Try a new OEM filter first.
Why is my ice maker not making ice when the water dispenser still works?
That tells you water is reaching the fridge. On most models the water inlet valve has a separate coil for the ice maker, so the ice side of the valve can fail while the dispenser side keeps working. The other usual causes are a frozen fill tube, a freezer that is too warm, or an ice maker module that has stopped cycling.
Why is my ice maker making small or hollow cubes?
The tray is not getting enough water. That is usually low water pressure, a filter that is overdue, or a water valve that is starting to fail. A partly frozen fill tube can do it too.
Why is my ice maker leaking water?
Common causes are a water valve that does not close all the way, a cracked fill tube or a loose fitting on the supply line. If the fridge is not level, water can spill out of the tray before it freezes. Ice building up under the ice maker inside the freezer often means the fill tube is partly frozen and water is running past it.
How long does a new ice maker take to make ice?
Expect the first ice within about 12 to 24 hours after the water is on and the freezer is cold. A full bin can take a day or two longer. Throw out the first few batches.
Call or text (415) 585-5900. Same-day service available. $219 service call, free if you go ahead with the repair.
Bay Appliance Repair · 140 San Pedro Rd, Daly City, CA 94014 · Mon to Fri, 8am to 5pm · Residential service only.
Call (415) 585-5900 or book online
Mon to Fri, 8am to 5pm · $219 service call, free if you go with the repair · 90-day parts and labor on qualifying repairs