DRYER REPAIR

* Lubricate Motors
* Vent Line Replacement
* Lint Removal

DRYER REPAIR NOISY?

Excessive noise may be caused by problems with the bearings or seals, including excessive wear or defects in workmanship.

These types of problems may also be due to belts that are excessively worn or frayed. Noisy dryers can indicate a problem with the drum glides, bearings, or support rollers, among other parts. Use our troubleshooting guide to test each part.

Longer Drying Time

Dry times that are longer than usual (typical cycle time is around 45 minutes) may denote problems with the heating element or coils.

The thermostat may be defective and in need of replacement. There may also be lint clogs that inhibit the performance of the dryer.

Failure to start

these problems may stem from a faulty switch, cycling thermostat or faulty wiring connections. The thermostat may also be at the root of these problems if it has a high limit. There may be problems with fuses or circuit breakers, as well. Learn how to troubleshoot a dryer that will not start with our repair guide. The source of the issue could be the door switch, thermal fuse, or rotary/push start switch.

Too Hot

When the dryer exterior is too hot or clothes are hotter than normal, the vent could be clogged or malfunctioning. This is a fire hazard and should be addressed immediately.

Vent Flap Immobile

The vent hood flap should move when the dryer is operating. If it is not moving, the vent is seriously blocked. Clean out the vent, and if the issue continues, call an expert.

PUMPS BUT WONT SPIN

Burning Smell

Lint can build up in a variety of places, including the drum casing. This accumulated lint can easily catch fire. If you smell burning, shut off the dryer and call for help immediately.

Clothes Aren’t Dry

If the exhaust vent is blocked, clothes can’t dry because moist air can’t flow out of the dryer. Wet clothes can also be caused by defective heating elements and moisture sensors.

Will not shut off

1% of Customers Reported

To repair a dryer that won’t shut off, follow our guide for troubleshooting parts such as the door switch, timer, and thermostats.

Shuts off too soon

1% of Customers Reported

If your dryer is shutting off too soon, the source of the issue is probably the moisture sensor. Learn how to fix this problem with our troubleshooting guide.

NOISY

excessive noise may be caused by problems with the bearings or seals, including excessive wear or defects in workmanship. These types of problems may also be due to belts that are excessively worn or frayed.

Longer Drying Time
dry times that are longer than usual (typical cycle time is around 45 minutes) may denote problems with the heating element or coils. The thermostat may be defective and in need of replacement. There may also be lint clogs that inhibit the performance of the dryer. Takes too long to dry To find out why your dryer is taking too long to dry clothes, start by checking common parts such as the lint filter, blower wheel, coils, and seals.

Failure to start

these problems may stem from a faulty switch, cycling thermostat or faulty wiring connections. The thermostat may also be at the root of these problems if it has a high limit. There may be problems with fuses or circuit breakers, as well.

Too Hot

When the dryer exterior is too hot or clothes are hotter than normal, the vent could be clogged or malfunctioning. This is a fire hazard and should be addressed immediately. Find out why your dryer is getting too hot with our repair guide. We’ll show you how to check the thermostats, thermistor, and exhaust vent for common issues.

Vent Flap Immobile

The vent hood flap should move when the dryer is operating. If it is not moving, the vent is seriously blocked. Clean out the vent, and if the issue continues, call an expert.

Burning Smell

Lint can build up in a variety of places, including the drum casing. This accumulated lint can easily catch fire. If you smell burning, shut off the dryer and call for help immediately.

No heat or not enough heat

7% of Customers Reported

If your dryer won’t achieve a high enough temperature to dry clothes, the heating element or high limit thermostat may need replacing. Learn how to test each part here.

Will not tumble

5% of Customers Reported

Learn how to fix a dryer that won’t tumble with our troubleshooting guide. The source of the issue could be worn parts such as the belt or idler pulley assembly.

Timer will not advance

4% of Customers Reported

If your dryer’s timer will not advance, it could be a problem with the timer motor or cycling thermostat. Learn how to repair these parts using our troubleshooting guide.

OTHER TROUBLE  Clothes Aren’t Dry

If the exhaust vent is blocked, clothes can’t dry because moist air can’t flow out of the dryer. Wet clothes can also be caused by defective heating elements and moisture sensors.

Reliable, Prompt, Affordable dishwasher repair service

Clothes dryers, while seemingly simple, can run into a whole load of problems and then, of course, require dryer repair. Dryers make drying wet laundry easier and faster by tumbling and heating clothing. However, if your dryer is getting on in years or in need of routine maintenance, you may curse it more than you use it

1

Your laundry is still wet after two whole cycles in the dryer. Now what?

Caution! Always remember to disconnect any power source prior to working on a dryer; failure to do so may result in injury or death during repair. Gas lines should also be shut off prior to repair on any gas appliance. Safety glasses should be worn when tools are being employed. We offer free consultations, so please call us if you have any questions, concerns or doubts.

Get dryer repair in SF at affordable prices. We provide excellent service and offer discounts! Our professionals are trained to fix most of dryer problems. Our professionals are specifically trained to troubleshoot these and other problems. Repairs on electric appliances should be carried out by trained professionals due to the dangerous nature of working with electricity. We are ready to handle problems with any major brand, including Kenmore, Maytag and many others.

Reliable Dryer Repair Service In Miami

Dryer repair service in Miami at affordable prices. Excellent service and discounts! Our professionals are trained to fix most of dryer problems

Clothes dryers, while seemingly simple, can run into a whole load of problems and then, of course, require dryer repair. Dryers make drying wet laundry easier and faster by tumbling and heating clothing. However, if your dryer is getting on in years or in need of routine maintenance, you may curse it more than you use it Get dryer repair at affordable prices. We provide excellent service and offer discounts! Our professionals are trained to fix most of dryer problems. Our professionals are specifically trained to troubleshoot these and other problems. Repairs on electric appliances should be carried out by trained professionals due to the dangerous nature of working with electricity. We are ready to handle problems with any major brand, including Kenmore, Maytag and many others.

Your laundry is still wet after two whole cycles in the dryer. Now what?

Caution! Always remember to disconnect any power source prior to working on a dryer; failure to do so may result in injury or death during repair.

Gas lines should also be shut off prior to repair on any gas appliance. Safety glasses should be worn when tools are being employed. We offer free consultations, so please call us if you have any questions, concerns or doubts.

Get dryer repair in Miami at affordable prices. We provide excellent service and offer discounts! Our professionals are trained to fix most of dryer problems. Our professionals are specifically trained to troubleshoot these and other problems. Repairs on electric appliances should be carried out by trained professionals due to the dangerous nature of working with electricity. We are ready to handle problems with any major brand, including Kenmore, Maytag and many others.

• ystems for clogs.

Running Too Hot

• Be sure the lint filter is clean.

• Check exhaust and vent systems for clogs.

Won’t Start or Run at all

• Make sure the dryer is plugged in and the circuit breaker did not trip.

• Make sure the door is securely closed.

Dryer Runs but Won’t Heat Up

• Check to see that the dryness selector button is fully depressed.

• Check the breaker to see if it has not tripped.

• DRYER REPAIR NOISY?

• Excessive noise may be caused by problems with the bearings or seals, including excessive wear or defects in workmanship.

• These types of problems may also be due to belts that are excessively worn or frayed.

• Longer Drying Time

• Dry times that are longer than usual (typical cycle time is around 45 minutes) may denote problems with the heating element or coils.

• The thermostat may be defective and in need of replacement. There may also be lint clogs that inhibit the performance of the dryer.

• Failure to start

• these problems may stem from a faulty switch, cycling thermostat or faulty wiring connections. The thermostat may also be at the root of these problems if it has a high limit. There may be problems with fuses or circuit breakers, as well.

• Too Hot

• When the dryer exterior is too hot or clothes are hotter than normal, the vent could be clogged or malfunctioning. This is a fire hazard and should be addressed immediately.

• Vent Flap Immobile

• The vent hood flap should move when the dryer is operating. If it is not moving, the vent is seriously blocked. Clean out the vent, and if the issue continues, call an expert.

• PUMPS BUT WONT SPIN

Burning Smell
No heat or not enough heat

7% of Customers Reported

If your dryer won’t achieve a high enough temperature to dry clothes, the heating element or high limit thermostat may need replacing. Learn how to test each part here.

•  

• Lint can build up in a variety of places, including the drum casing. This accumulated lint can easily catch fire. If you smell burning, shut off the dryer and call for help immediately.

• Clothes Aren’t Dry

• If the exhaust vent is blocked, clothes can’t dry because moist air can’t flow out of the dryer. Wet clothes can also be caused by defective heating elements and moisture sensors.